HDD Bore Planner

Plan depth, distance, pitch and steering for a directional bore. Pick what you want to calculate, then enter where the bit is now.

How to use this planner
  • Depth now is how deep the bit is below the ground surface, in inches. Rod length is in feet.
  • Current pitch is the pitch reading in percent. Choose Negative when the bit is pointing down and Positive when it is pointing up. You can also type a minus sign in the field.
  • Ground grade is the slope of the ground ahead of you. Choose Rises if the ground gets higher the farther you go, or Falls if it gets lower.
  • Steer shows what happens if you push to turn the head. Push 12 O’Clock raises the pitch each rod, and Push 6 O’Clock lowers it, by up to the max pitch change per rod you enter.
  • Results are estimates. Always confirm depth with your locator.

Best case: this assumes ideal soil and the full max pitch change on every rod. Enter a lower max pitch change per rod to plan for tougher soil.

Calculator assumes no change in direction: a straight bore at constant pitch. Use the steer option to plan a change in pitch.

Rod by rod
RodRun (ft)Depth (in)Pitch

How it works: Depths are measured below the ground surface, so the ground grade ahead changes them. Pitch is rise over horizontal run, and the math uses the true angle of the pitch. Treat all results as estimates and confirm with your locator.

Shopping Cart
Scroll to Top